ELECTRICAL SPECIFICATIONS
· Primary power (DC or AC)
DC input: 12 VDC +10%, 500mA
AC input: 12 VAC +15%, 750mA RMS
· Relay Contacts: 16 form C, 5A 30VDC or 125 VAC, Resistive
· Inputs: 2 non-supervised, normally closed contacts for tamper and power fault
· Wiring Requirements:
Power: 1 twisted pair, 18 AWG
RS-485: 24 AWG, 4,000ft (1,200m) max., twisted pair(s) with shield
Alarm input: 1 twisted pair, 30 ohms max.
Output: As required for the load
· This processor is for use in low voltage, class 2circuit only. |